Bu çalışmada Kütahya’nın Emet ve Hisarcık bölgesindeki Eti Maden işletmesinin atığı olan ve buradaki çeşitli bölgelerden alınan E1 (0-1 zon arası kil), E2 (3. zon cevher kili), H1 (Kapıkaya kili) bor numuneleri incelenmiştir. Amaç bu bölgelerdeki tesislerde üretim sonucu açığa çıkan bor endüstri atıklarının çözünürleştirilmesini sağlamak, kimyasal analizlerini yapmak ve sezyum metalinin miktarını tayin etmektir. Öncelikle bu atıkların XRD, FT-IR ve TGA-DTA analizleri ile karakterizasyonları yapılmış, XRF ve AAS ile de kimyasal analizleri gerçekleştirilmiştir. Numunelerdeki sezyum miktarını tayin etmek için işletmeden temin edilen numuneler önce 110 °C’de 24 sa. etüvde bekletilerek kurutulmuştur. Kurutulan numuneler çeneli kırıcı cihazı ile kırılmış ve havanlı öğütücüde öğütülerek 150 mikron elek altı numuneler deneylerde kullanmak üzere hazırlanmıştır. Optimum ekstraksiyon koşullarını tayin etmek için kavurma sıcaklığı, bor atığı/çeşitli tuzların kütle oranları, kavurma süresi, 100 °C’de geri soğutucu altında karıştırma süresi ve katı/sıvı oranı gibi parametreler çalışılmıştır. Deneylerde sezyum miktarları alevli atomik absorpsiyon spektroskopisi (FAAS) cihazı ile tayin edilmiştir. Çalışma sonunda elde edilen maksimum sezyum ekstraksiyon değerleri E1 numunesi için %89.5, E2 numunesi için %97 ve H1 numunesi için %94 olarak hesaplanmıştır.
In this study, the waste of the Meat Mining enterprise in the Emet and Hisarcık region of Kütahya and taken from various areas here; E1 (0-1 zone square), E2 (3. zone square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square square squ The objective is to ensure the dissolving of bor industry waste revealed as a result of production in the facilities in these areas, to carry out chemical analyses and to determine the amount of sezyum metal. First, these waste were characterized by XRD, FT-IR and TGA-DTA analyses, and chemical analyses were performed with XRF and AAS. Examples provided by the enterprise to determine the quantity of secium in the samples before 110 °C 24 hours. It was drowned in waiting. Dry samples are broken with the necklace crushing device and are prepared for use in experiments with 150 microns of six-axle samples, put in the cranberries and put in the cranberries. To determine the optimal extraction conditions, parameters such as the freezing temperature, the mass ratio of bor waste/many salt, the freezing time, the time of mixing under the refrigerator at 100 °C and the solid/fluid ratio have been worked. In experiments, sezyum amounts were determined by the fire atomic absorption spectroscopy (FAAS) device. The maximum secium extraction values obtained at the end of the study were calculated at 89.5% for the E1 sample, 97% for the E2 sample and 94% for the H1 sample.
Alan : Mühendislik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|