Amaç: Bu çalışmanın amacı, üç farklı tek renkli rezin kompozitin yüzey sertliği, yüzey pürüzlülüğü, su emilimi ve suda çözünürlük özelliklerini karşılaştırmaktır. Gereç ve Yöntemler: Supra-nano dolduruculu kompozit (Omnichroma (OC), Tokuyama Dental, Japonya), mikrohibrit dolduruculu kompozit (Essentia(ES),GC,Japonya) ve ultrafine nanohibrit dolduruculu kompozitten (Charisma Topaz ONE(CTO),Kulzer,Almanya) hazırlanan toplam 90 adet örnekten, 30’ar örnek içeren 3 grup oluşturuldu. Kompozit örnekleri 5 mm çapında 2 mm kalınlığında teflon kalıplar kullanılarak hazırlandı. Hazırlanan örneklere alüminyum oksit cila diskleri (Sof-Lex disk, 3M Espe, ABD) ile polisaj yapıldı. Kompozit örneklerin Vickers sertlik değerleri (n=10) (VHN, Shimadzu, Kyoto, Japonya) ve yüzey pürüzlülük değerleri (Ra) (n=10) profilometre cihazı (MarSurf M 300 C, Mahr, Almanya) kullanılarak ölçüldü. Su emilimi ve suda çözünürlük değerleri (n=10) ISO standartlarına (ISO 4049:2009) göre hesaplandı. Verilerin istatistiksel analizi tek yönlü ANOVA ve Duncan testleri kullanılarak değerlendirildi (p<0.05). Bulgular: En yüksek VHN değeri CTO grubunda (42.40±6.39), en düşük VHN değeri ise ES grubunda (26.41±5.69) elde edildi. Kompozit grupları arasında istatistiksel olarak anlamlı fark bulundu (p<0.05). Tüm kompozitlerde alt/üst VHN oranı % 80’in üzerinde olduğu görüldü. Kompozit gruplarının Ra değerleri arasında istatistiksel olarak anlamlı farklılık bulunmadı (p>0.05). En yüksek su emilimi OC grubunda (7.64±3.26), en düşük su emilimi ise CTO grubunda (4.24 ±3.49) elde edildi. Tüm kompozit grupları arasında istatistiksel olarak anlamlı farklılık bulundu (p<0.05). Farklı kompozitlerin suda çözünürlük değerleri arasında ise istatistiksel olarak anlamlı farklılık bulunmadı (p>0.05). Sonuçlar: Bu çalışmada kullanılan tek renkli kompozit rezinlerin yüzey sertliği, yüzey pürüzlülüğü, su emilimi ve suda çözünürlük değerleri kompozit materyalin organik içeriğine ve inorganik doldurucu tipine göre değişkenlik gösterebilir. Anahtar Kelimeler: Rezin Kompozit, Su Emilimi, Suda Çözünürlük, Yüzey Pürüzlülüğü, Yüzey Sertliği
Purpose: The purpose of this study is to compare the characteristics of the surface hardness, surface smoothness, water absorption and water resolution of three different single-colored resin composites. Tools and Methods: A total of 90 samples of supra-nano filling compounds (Omnichroma (OC), Tokuyama Dental, Japan), microhybrid filling compounds (Essentia(ES), GC, Japan) and ultraphine nanohybrid filling compounds (Charisma Topaz ONE(CTO), Kulzer, Germany) included 30 samples. Composite samples were prepared using teflon patterns with a thickness of 2 mm in diameter of 5 mm. Prepared samples were polished with aluminum oxide curve disks (Sof-Lex disks, 3M Espe, USA). Composite samples were measured using Vickers hardness values (n=10) (VHN, Shimadzu, Kyoto, Japan) and surface smoothness values (Ra) (n=10) profylometer device (MarSurf M 300 C, Mahr, Germany). Water absorption and water resolution values (n=10) are calculated according to ISO (ISO 4049:2009) standards. The statistical analysis of the data was evaluated using one-way ANOVA and Duncan tests (p<0.05). Results: The highest VHN value was in the CTO group (42.40±6.39) and the lowest VHN value was in the ES group (26.41±5.69) There was a statistically significant difference between the composite groups (p<0.05). In all compounds, the lower/top VHN ratio was found to be above 80%. There was no statistically significant difference between the Ra values of the composite groups (p>0.05). The highest water absorption was in the OC group (7.64±3.26), while the lowest water absorption was in the CTO group (4.24±3.49). There were statistically significant differences between all composite groups (p<0.05). There was no statistically significant difference between the water resolution values of different composites (p>0.05). Results: The surface hardness, surface smoothness, water absorption and water resolution values of single-colored composite resins used in this study may vary according to the organic content of the composite material and the type of inorganic fillers. Keywords: Refined Composite, Water Emulsification, Water Resolution, Surface Smoothness, Surface Hardness
Alan : Sağlık Bilimleri
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|