Deprem ihtimali taşıyan illerde, Afet ve Acil Durum Yönetimi Başkanlığı (AFAD) tarafından yürütülen İl Afet Risk Azaltma Planı (İRAP) kapsamında, şehirlerin risk haritası hazırlanmaya başlamıştır. Risk çalışmalarının öncelikli konularından biri de faya bağlı tampon bölgelerin belirlenmesidir. Fayın zeminlerde oluşturduğu deformasyon ve risk, yerleşim alanlarında alan kaybına ve değer kaybına neden olmaktadır. Olası deprem sırasında ortaya çıkacak can ve mal kayıplarının önüne geçilmesi için tampon bölgenin doğru belirlenmesi büyük önem arz etmektedir. Bu çalışmada, Van Gölü doğusunda yer alan eski göl ve akarsu sedimanlarından oluşan Van/Bardakçı bölgesindeki Pleistosen-Holosen yaşlı kil çökellerinin mühendislik özellikleri ve bu zemini kesen bindirme fayının zemin özelliklerini nasıl etkilediği incelenmiştir. 23 Ekim 2011 (Mw=7.1) Van depremine neden olan ve bindirme karakterli Van Fayı’nın tavan ve taban blokları üzerinde yapılan sondajlar ile her iki blok içerisinden alınan zemin numuneleri üzerinde zeminin özellikleri belirlenmiştir. Arazide Standart Penetrasyon Testi (SPT) ve Menard Presiyometre Testi (MPT) yapılmıştır. Aynı zamanda, kil çökellerden örselenmiş ve örselenmemiş (UD) zemin numuneleri alınmış ve laboratuvarda bu numunelerin fiziksel ve mekanik özellikleri belirlenmiştir. Elde edilen sonuçlar değerlendirildiğinde, bindirme fayına yakın kesimlerde tavan bloğunda zemin özelliklerinin taban bloğa nazaran daha düşük dayanım özellikleri gösterdiği tespit edilmiştir. Bindirme türü fay kuşaklarında zemine bağlı afet riski değerlendirildiğinde, tampon bölgenin fayın taban bloğuna göre, tavan bloğunda daha geniş tutulması gerektiği sonucuna ulaşılmıştır.
Within the scope of the Provincial Level Disaster Risk Reduction Plan (IRAP) carried out by the Disaster and Emergency Management Presidency (AFAD) in provinces with earthquake probability, the risk map of the cities has been started to be prepared. One of the priority titles of risk studies is determining the buffer zones of faults. The deformation and risk caused by the fault in the settlement area cause loss of area and value on the surface. In order to prevent loss of life and property during a possible earthquake, great importance to determine the buffer zone correctly. In this study, the engineering properties of the Pleistocene-Holocene clay deposits in the Van / Bardakçı region, which consists of old lake and stream sediments located in the east of Lake Van, and how the thrust fault cutting these sediments affects the soils properties was investigated. The characteristics of the soils were determined on the clay samples taken from both the hanging and foot walls by drillings along the Van Fault which caused the 23 October 2011 (Mw = 7.1) Van earthquake. In the field, Standard Penetration Test (SPT) and Menard Pressiometer Test (MPT) were performed. At the same time, disturbed and undisturbed (UD) soil samples were taken from the clay deposits and their physical and mechanical properties were determined in the laboratory. When the results were evaluated, it has been determined that the soil properties of the hanging wall show lower strength properties than the footwall in the zone near to the fault. In disaster risk evaluations, it was concluded that the buffer zone on the hanging wall should be wider than on the foot wall in thrust fault zones.
Field : Fen Bilimleri ve Matematik; Mimarlık, Planlama ve Tasarım; Mühendislik; Ziraat, Orman ve Su Ürünleri
Journal Type : Uluslararası
Relevant Articles | Author | # |
---|
Article | Author | # |
---|