Zorunlu ihtiyaç olarak ortaya çıkan ayakkabı, zamanla gelişen ve değişen koşullar doğrultusunda önemli tüketim ürünlerinden bir tanesi olmuştur. Gün içerisinde uzun süre kullanılması nedeniyle insan sağlığı üzerinde de doğrudan etkili olabilmektedir. Hem rahat hem de sağlıklı kullanım özelliklerine sahip ayakkabıların üretilmesi ise antropometrik ölçülerin alınması ve doğru ayak numara sistemlerinin tespit edilerek kullanılması ile sağlanabilir. Dünyada kullanılan farklı ayak ölçü sistemleri bulunmaktadır. Ancak, Türk halkının ayak ölçüleri ile ilgili bugüne kadar yapılmış antropometrik bir standart ölçü sistemi bulunmamaktadır. Türk Standartları Enstitüsü tarafından, ayakkabı üretiminde kullanılmak üzere 5553 no’ lu standart kabul edilmiştir. Yayınlanan bu standarta göre, Türk ayak yapısına en uygun numaralandırma sistemi olarak seçilen Fransız ölçü sistemi kullanılmaktadır. Ancak ayak yapısına ve ölçüsüne uygun olmayan sistemlerin kullanılması, tüketicilerin ayakkabı tercihleri üzerinde doğrudan etkili olmaktadır. Tüketici çoğu zaman satın almak istediği ayakkabı türleri içerisinden kendi ayak yapısına uygun ayakkabıları tercih etmek zorunda kalabilmektedir. Araştırmada Türk ayak yapısının belirlenmesi ve ölçülerin tespit edilmesi amaçlanmıştır. Ayakkabının ayağa uyum sağlaması başta ayak sağlığı olmak üzere, birçok konuda yaşanan problemleri en aza indirecek ya da ortadan kaldıracaktır. Bu nedenle araştırma soncunda elde edilen veriler hem üreticiler hem de tüketiciler açısından önem taşımaktadır. Belirlenen ayak formu ve ölçüleri doğrultusunda hazırlanan kalıpların kullanılması, sektörde faaliyet gösteren işletmelerin, Türk ayak yapısına uygun ayakkabı üretmesine olanak sağlayacak, tüketicilerinde kullanım açısından ayak yapısına uygun, ayak sağlığını tehlikeye atmayan, ergonomik ve tercih açısından ise günün moda trendlerine uygun ayakkabı satın alabilmeleri açısından katkı sağlayacaktır. Araştırma sonucunda en fazla oranlarla milo ölçüsünün 221-230 mm, konturpiye çevresinin 231-240 mm ve topuk-bilek çevresi ölçüsünün ise 301-310 mm aralığında olduğu ortaya çıkmıştır. Çıkan ölçüler ayakkabı üretiminde kullanılan TSE 5553 no’lu standart ölçüleri ile karşılaştırıldığında topuk-bilek ölçüsünde 6,1 mm daha az, konturpiye ölçüsünde 15,68 mm ve milo ölçüsünde 11,19 mm daha fazla ölçü farkı çıkmıştır. Katılımcıların ayak tiplerinin ise en fazla tip 1 olarak adlandırılan sınıfta yer aldığı görülmüştür.
The shoe that emerged as a compulsory need has become one of the important consumption products in line with the time developing and changing conditions. Due to its long use during the day, it can also have a direct effect on human health. Production of shoes with both comfortable and healthy use characteristics can be achieved by taking anthropometric measurements and using the correct foot number systems. There are different foot measurement systems used in the world. However, there is no anthropometric standard measurement system made to date regarding the foot measurements of the Turkish people. The Turkish Standards Institute has approved the 5553 no' lu standard for use in shoe production. According to this published standard, the French measurement system is used as the most suitable numbering system for the Turkish foot structure. However, the use of systems that do not suit the foot structure and size is directly influenced by consumers’ shoe preferences. Consumers may often have to choose the shoes that suits their foot structure from the shoes they want to buy. The study aimed at determining the structure of the Turkish foot and determining the measurements. The adaptation of the shoes to the foot will minimise or eliminate the problems that occur in many aspects, including the health of the foot. Therefore, the results of the research are important for both producers and consumers. The use of patterns prepared in accordance with the specified foot shape and measurements will enable enterprises operating in the industry to produce shoes in accordance with the Turkish foot structure, will contribute to their consumers in accordance with their foot structure in terms of use, which does not compromise the health of the foot, and in terms of ergonomic and preferential, they will be able to purchase shoes in accordance with the fashion trends of the day. The research finds that the milo size is 221-230 mm, the contour size is 231-240 mm, and the coal-bear size is 301-310 mm. The output measurements compared to the standard measurements of TSE 5553 used in shoe production, there was a 6.1 mm smaller difference in the size of the coat-beard, 15.68 mm in the size of the counterpiece and 11.19 mm more in the size of the milo. The foot types of participants were found to be the most included in the class called Type 1.
Journal Type : Uluslararası
Relevant Articles | Author | # |
---|
Article | Author | # |
---|