Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 11
INVESTIGATION OF SINGLE SHADE COMPOSITE RESIN SURFACE ROUGHNESS AND COLOR STABILITY
2021
Dergi:  
Current Research in Dental Sciences
Yazar:  
Özet:

Abstract Aim: Although it has been stated that composite resins should be used in the restoration of teeth after color shade selection, it has recently been stated that single-shade composite resins can be used for all tooth shades. The objective of our study is to evaluate the surface roughness and color change of single-shade composite resins compared with multi-shade system composite resins. Material and methods: In our study, samples (8 mm diameter and 2 mm depth) were obtained using single-shade (Omnichrorma) and multi-shade system (Filtek Universal Restorative, Clearfil Majesty ES-2 Premium, Harmonize) composite resins. Two steps finishing and polishing system (Clearfil Twist Dia) was used in the finishing polishing processes of the samples. The initial roughness values of the samples were measured with a profilometer and color values with a spectrophotometer. Then, color measurements of the samples kept in coffee were made on the 1st, 7th and 30th days and after the last polishing process. The surface roughness (Ra) and color change (ΔE00) were statistically analyzed using two-way variance analysis (ANOVA) and Tukey post-hoc test (p<0.05). Results: There was no statistically significant difference between the initial surface roughness values of composite resins with single and multi-shade systems (p>0.05). Composite resin with single-shade system showed statistically significantly more color change than composite resin with multi-shade systems in all time periods (p<0.001). Although re-polishing these materials reduced the color changes, it could not decrease it below the acceptability threshold value (ΔE00:1.8). Conclusion: New generation single-shade composite resin with smart chromatic material technology can simplify color selection without sacrificing esthetic success. However, this composite resin shows more color changes than multi-shade systems composite resins. Keywords: Color stability, Single-shade composite resin, Surface roughness TEK RENK KOMPOZIT REZININ YÜZEY PÜRÜZLÜLÜĞÜNÜN VE RENK DEĞIŞIMININ İNCELENMESI Amaç: Kompozit rezinler dişlerin restorasyonunda renk tonu seçildikten sonra kullanılması gerektiği belirtilmesine rağmen son dönemde tek renk kompozit rezinin tüm diş renk tonları için kullanılabileceği belirtilmiştir. Çalışmamızın amacı tek renk kompozit rezinin çoklu renk sistemine sahip kompozit rezinlere göre yüzey pürüzlülük ve renk değişimini incelemektir. Gereç ve Yöntem: Çalışmamızda tek renk (Omnichrorma) ve çoklu renk sistemine sahip kompozit rezinler (Filtek Universal Restorative, Clearfil Majesty ES-2 Premium, Harmonize) kullanılarak örnekler (8 mm çapında ve 2 mm yüksekliğinde) hazırlandı. Hazırlanan örneklerin bitirme ve cila işleminde iki basamaklı bitirme ve cila sistemi (Clearfil Twist Dia) kullanıldı. Örneklerin başlangıç pürüzlülük değerleri profilometre, renk değerleri spektrofotometre ile ölçüldü. Daha sonra örnekler kahve (Nescafe Klasik, Türkiye) içerisinde bekletilerek 1, 7, 30. gün ve son polisaj işleminden sonra renk ölçümleri yapıldı. Yüzey pürüzlülük (Ra) ve renk değişim değerleri (ΔE00) iki yönlü varyans analizi (ANOVA) ve Tukey testi kullanılarak istatistiksel analiz yapıldı (p<0.05). Bulgular: Tek ve çoklu renk sistemine sahip kompozit rezinlerin başlangıç yüzey pürüzlülük değerleri arasında istatistiksel olarak anlamlı farklılık görülmedi (p>0.05). Tek renk sistemine sahip kompozit rezin tüm zaman dilimlerinde çoklu renk sistemine sahip kompozit rezinlere göre istatistiksel olarak anlamlı şekilde daha fazla renk değişimi gösterdi (p<0.001). Bu materyaller üzerinde yapılan son polisaj işleminden sonra renk değişimleri azaltmasına rağmen kabuledilebilirlik eşiği değerinin (ΔE00:1.8) altına düşmemiştir. Sonuç: Akıllı kromatik malzeme teknolojisine sahip yeni nesil tek renkli kompozit rezin estetik başarıdan ödün vermeden renk seçimini basitleştirebilir. Fakat 30 gün sonunda tek renk kompozit rezin çoklu renk sistemine sahip kompozit rezinlerden daha fazla renk değişikliği göstermektedir. Anahtar Kelimeler: Renk stabilitesi, Tek renk kompozit rezin, Yüzey pürüzlülüğü

Anahtar Kelimeler:

0
2021
Yazar:  
Özet:

Aim: Although it has been stated that composite resins should be used in the restoration of teeth after color shade selection, it has recently been stated that single-shade composite resins can be used for all tooth shades. The objective of our study is to evaluate the surface roughness and color change of single-shade composite resins compared with multi-shade system composite resins. Material and methods: In our study, samples (8 mm diameter and 2 mm depth) were obtained using single-shade (Omnichrorma) and multi-shade system (Filtek Universal Restorative, Clearfil Majesty ES-2 Premium, Harmonize) composite resins. Two steps finishing and polishing system (Clearfil Twist Dia) was used in the finishing polishing processes of the samples. The initial roughness values of the samples were measured with a profilometer and color values with a spectrophotometer. Then, color measurements of the samples kept in coffee were made on the 1st, 7th and 30th days and after the last polishing process. The surface roughness (Ra) and color change (ΔE00) were statistically analyzed using two-way variance analysis (ANOVA) and Tukey post-hoc test (p<0.05). Results: There was no statistically significant difference between the initial surface roughness values of composite resins with single and multi-shade systems (p>0.05). Composite resin with single-shade system showed statistically significantly more color change than composite resin with multi-shade systems in all time periods (p<0.001). Although re-polishing these materials reduced the color changes, it could not decrease it below the acceptability threshold value (ΔE00:1.8). Conclusion: New generation single-shade composite resin with smart chromatic material technology can simplify color selection without sacrificing esthetic success. However, this composite resin shows more color changes than multi-shade systems composite resins. Keywords: Color stability, Single-shade composite resin, Surface roughness TEK RENK KOMPOZIT REZININ YÜZEY PÜRÜZLÜLÜĞÜNÜN VE RENK DEĞIŞIMININ İNCELENMESI Özet Amaç: Kompozit rezinler dişlerin restorasyonunda renk tonu seçildikten sonra kullanılması gerektiği belirtilmesine rağmen son dönemde tek renk kompozit rezinin tüm diş renk tonları için kullanılabileceği belirtilmiştir. Çalışmamızın amacı; tek renk kompozit rezinin çoklu renk sistemine sahip kompozit rezinlere göre yüzey pürüzlülük ve renk değişimini incelemektir. Gereç ve Yöntem: Çalışmamızda tek renk (Omnichrorma) ve çoklu renk sistemine sahip kompozit rezinler (Filtek Universal Restorative, Clearfil Majesty ES-2 Premium, Harmonize) kullanılarak örnekler (8 mm çapında ve 2 mm yüksekliğinde) hazırlandı. Hazırlanan örneklerin bitirme ve cila işleminde iki basamaklı bitirme ve cila sistemi (Clearfil Twist Dia) kullanıldı. Örneklerin başlangıç pürüzlülük değerleri profilometre, renk değerleri spektrofotometre ile ölçüldü. Daha sonra örnekler kahve (Nescafe Klasik, Türkiye) içerisinde bekletilerek 1, 7, 30. gün ve son polisaj işleminden sonra renk ölçümleri yapıldı. Yüzey pürüzlülük (Ra) ve renk değişim değerleri (ΔE00) iki yönlü varyans analizi (ANOVA) ve Tukey testi kullanılarak istatistiksel analiz yapıldı (p<0.05). Bulgular: Tek ve çoklu renk sistemine sahip kompozit rezinlerin başlangıç yüzey pürüzlülük değerleri arasında istatistiksel olarak anlamlı farklılık görülmedi (p>0.05). Tek renk sistemine sahip kompozit rezin tüm zaman dilimlerinde çoklu renk sistemine sahip kompozit rezinlere göre istatistiksel olarak anlamlı şekilde daha fazla renk değişimi gösterdi (p<0.001). Bu materyaller üzerinde yapılan son polisaj işleminden sonra renk değişimleri azaltmasına rağmen kabuledilebilirlik eşiği değerinin (ΔE00:1.8) altına düşmemiştir. Sonuç: Akıllı kromatik malzeme teknolojisine sahip yeni nesil tek renkli kompozit rezin estetik başarıdan ödün vermeden renk seçimini basitleştirebilir. Fakat 30 gün sonunda tek renk kompozit rezin çoklu renk sistemine sahip kompozit rezinlerden daha fazla renk değişikliği göstermektedir. Anahtar Kelimeler: Renk stabilitesi, Tek renk kompozit rezin, Yüzey pürüzlülüğü

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler






Current Research in Dental Sciences

Dergi Türü :   Ulusal

Metrikler
Makale : 1.431
Atıf : 2.156
2023 Impact/Etki : 0.013
Current Research in Dental Sciences