Cam, tarih boyunca bazı önemli evreler geçirmiştir. Yaklaşık 3500 yıl öncesinde camın bulunuşu ile başlayan gelişim süreci, milattan kısa bir süre önce, sıcak cam üflemenin keşfi ile camın daha geniş kitlelere yayılmasını sağlamıştır. Daha sonra, kristal camın gelişmesi ve düşük maliyetli cam üretiminin başlaması ile cam malzemenin kullanımı yaygınlaşmıştır. En önemli dönüm noktası ise, yaklaşık 100 yıl önceki stüdyo camcılığı hareketidir. Cam eski uygarlıklardan günümüze kadar, dekoratif amaçlı kullanılmış bir malzemedir. Doğa kendiliğinden cam malzemesini üretmiş ve obsidiyen adı verilen doğal cam eski zamanlardan itibaren çeşitli aletlerin yapımında kullanılmıştır. Teknolojinin gelişmesi ile birlikte, cam endüstriyel olarak üretilmeye başlanmış aynı zamanda stüdyo camcılığının gelişmesiyle de sıcak cam şekillendirme, cam sanatları içinde bir teknik olarak kendini var etmiştir. Bu çalışmada, sıcak cam tekniğinde yüzey etkilerini incelemek amacıyla odun küllerinin sıcak cam şekillendirmede nasıl bir etki yarattığı incelenmiştir. Elde edilen sonuçlara göre, çok ince partiküllere sahip olmaları, bol miktarda bulunmaları ve yüksek tepkimeye girebilme kabiliyetine sahip olmaları gibi birçok avantaja sahip olan odun küllerinin doğa dostu bir dekorasyon malzemesi olarak sıcak cam tekniğinde kullanılabilecekleri gösterilmiştir.
Glass has passed some important phases throughout history. The development process that began with the discovery of glass in about 3500 years ago has enabled glass to spread to wider masses with the discovery of hot glass blowing. Later, the use of glassware became widespread with the development of crystal glass and the beginning of low cost glass production. The most important turning point is the movement of the studio glass, which was about 100 years ago. Glass is a material used for decorative purposes from ancient civilizations to day-to-day. Nature has spontaneously produced glassware and the natural glass called obsidian has been used in the construction of various tools since ancient times. With the development of technology, the production of glass industry has started and at the same time, with the development of studio glassware, hot glass forming has made itself a technique in glass arts. In this study, the effect of wood ash on hot glass formation was investigated in order to investigate surface effects in hot glass technique. According to the results obtained, it has been shown that wood ash, which has many advantages such as having very fine particles, high avaliability and high reactivity, can be used in hot glass technique as a eco-friendly decoration material.
Alan : Güzel Sanatlar; Sosyal, Beşeri ve İdari Bilimler
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|